Mechanical Mobile Compactor, 2 Bays Deep (20 Bays) Mechanical Mobile Compactor Steering Wheel Compactor Cabinet for High Density Filing | Products | IGREEN Office Furniture

Mechanical Mobile Compactor

Steering Wheel Compactor Cabinet for High Density Filing

Mechanical mobile compactor with steering wheel drive: steel filing bays on floor tracks that close together and open one aisle where you need it, saving 50% to 60% of the floor space of standard shelving. Each bay base holds 1000 kg and each shelf carries 65 kg UDL. Cold rolled steel, powder coated, with a safety lock on each upstand. Supplied and installed in Malaysia by Igreen Office Furniture Sdn. Bhd.
Select your type:
Select your colour:
Put your quantity:

Key Features

Arrange a quotation for the Mechanical Mobile Compactor on WhatsApp

Steering wheel drive. Each movable bay has its own three-spoke steering wheel. Turn it and the bay rolls along the floor track, so one person opens an aisle exactly where the file is, with consistent rounding on opening and closing.

Safety Lock. There is a lock device on each upstand. Engage it before you step into the aisle and the bays cannot move while files are being retrieved.

Chain Mechanism and Sprocket. A heavy duty sprocket runs along a chain track. The wheel takes a fixed number of rotations of the steering, which is what stops it wearing out year after year.

Metal Wheel. The wheels are solid steel with a heavy duty double bearing, which is how each bay base carries 1000 kg.

Safety Devices Bearing. An anti-topple bearing keeps a bay upright if it hits the end of the track hard.

Fully cladding. The bays are closed in on the outside faces, so when the system is shut it reads as one clean block of office furniture, not open racking.

Anti-skid platform. The platform between the tracks is 1 mm PVC laminated particle board with a rough surface, laminated on all sides, so the aisle floor is not slippery to stand on.

Choose the depth. The system is built from bays 915 mm wide. A row can be 1 to 10 bays deep, which gives up to 10 bays on a single sided row and 20 on a double sided row, and all four movable rows can be moved together.

Good to know

It is installed, not delivered in a box. The tracks and platform are fixed to your floor and the bays are assembled on site. We measure the room first, so send us the room size and the door position with your enquiry.

How the size works. The arrangement is 10 shelving faces across 4860 mm, including the 800 mm walkway, and 2215 mm high. You choose the depth from 1 to 10 bays at 915 mm each. The one shown is 2 bays deep, 1830 mm.

How many arch files it holds. As a guide, one 915 mm bay takes about 11 three inch arch files on each of its 5 tiers, about 55 files a bay. Divide your file count by 55 for the bays you need. The standard shelf carries 65 kg UDL; 100 kg is on request.

Mechanical or hand push. A mechanical compactor is moved by turning a steering wheel through a chain drive. Igreen also supplies a hand push mobile compactor in 4 to 10 bays, which is moved by a handle on each bay.

Care & Maintanances

Wipe, do not wash. Wipe the powder coated steel clean with a mild soapy solution, then wipe dry with a clean cloth.

Keep the track clear. Sweep paper clips, staples and dust out of the floor track so nothing sits in the path of the wheels.

Load shelves evenly. The shelf rating is a uniformly distributed load. Spread files across the full width of the shelf, not stacked at one end.

Lock before you walk in. Make it a habit to engage the safety lock every time before entering an open aisle.

Product Informations

Specifications

Specification Mechanical Mobile Compactor
Operation Mechanical, steering wheel with chain and sprocket drive
Arrangement 10 shelving faces: 1 row single sided static, 4 rows double sided movable, 1 row single sided movable
Depth 1 to 10 bays deep, each bay 915 mm wide (2 bays deep shown = 20 bays)
Overall size, 2 bays deep W 1830 × L 4860 × H 2215 mm
Walkway (open aisle) 800 mm
Material Cold rolled carbon steel (JIS G3141 SPCC-SD) with enamel finish
Pre-treatment 7 stage pre-treatment process
Powder coating 50 to 80 micron, baked above 200 °C
Body and shelf thickness 0.8 mm steel after powder coating
Base and track 2 mm base; solid steel track 32 mm (W) × 19 mm (H)
Platform 1 mm PVC laminated particle board, rough anti-skid surface, laminated on all sides
Base loading 1000 kg per bay
Shelf loading 65 kg UDL per shelf standard; up to 100 kg UDL on request
Safety Safety lock on each upstand; anti-topple safety bearing
Tiers per bay 5 tiers (4 shelves plus the base level), as shown
Colour Light grey, as shown
Arch file capacity (guide) About 55 three inch arch files per bay; about 1,100 for 20 bays
Warranty 10 years on manufacturing defect

How many bays do you need?

Count your arch files and divide by 55. That is about 11 three inch (75 mm) arch files on each of the 5 tiers of a 915 mm bay. It is a planning guide; we confirm the count against your actual files when we measure the room.

Depth Bays Depth of system Arch files (guide)
2 bays deep 20 1830 mm about 1,100
5 bays deep 50 4575 mm about 2,750
8 bays deep 80 7320 mm about 4,400
10 bays deep 100 9150 mm about 5,500

Almost double the filing in the same room

In the same 8.5 m by 5.0 m room, standard shelving with fixed aisles fits 41 bays. The mechanical compactor fits 80 bays, because the fixed aisles become one 800 mm walkway that moves to where you need it. That is the 50% to 60% of floor space saved.

Optional accessories

Dualpurpose Shelf, Pull Out Frame, Pull Out Shallow Drawer, Platform, Mobile Sliding Divider, Swing Door and Swing Door With Glass.

Where it is used

Storage rooms, administrative and employee filing rooms, government agency filing, HR filing rooms, account departments and any office where the files have outgrown the room.

Mechanical or hand push mobile compactor

Mechanical Mobile Compactor Hand Push Mobile Compactor
How it moves Steering wheel, chain and sprocket drive Handle on each bay, pushed by hand
Sizes 10 shelving faces, 1 to 10 bays deep (10 to 100 bays) 4 to 10 bays
Height 2215 mm 2175 mm
Base loading 1000 kg per bay Not published

Frequently asked questions

What is a mechanical mobile compactor?

It is a set of steel filing bays mounted on floor tracks. The bays sit closed against each other and you turn a steering wheel to roll them apart and open a single aisle where you need it. Because only one aisle exists at a time, the same room holds far more files than fixed shelving.

How much space does a mechanical compactor save?

Compared with standard shelving in the same room, a mechanical compactor system saves 50% to 60% of the floor space, because the fixed aisles between every row are replaced by one movable aisle.

How much weight can it hold?

The base holds 1000 kg per bay. Each shelf carries 65 kg as a uniformly distributed load as standard, and shelves rated to 100 kg are available on request.

What is the difference between a mechanical and a hand push mobile compactor?

A mechanical compactor is moved by turning a steering wheel that drives the bay through a chain and sprocket. A hand push compactor is moved by pulling or pushing a handle on the bay itself. Igreen supplies both.

What size is the mechanical mobile compactor?

It is 4860 mm long across its 10 shelving faces, including an 800 mm walkway, and 2215 mm high. The depth is your choice from 1 to 10 bays at 915 mm each, so 2 bays deep is 1830 mm.

How many arch files fit in one bay?

As a guide, about 55 three inch arch files: a 915 mm wide bay takes about 11 files with a 75 mm spine on each of its 5 tiers. A 20-bay system holds about 1,100 files and an 80-bay system about 4,400. Divide your number of files by 55 to estimate the bays you need.

How many shelves are in each bay?

Each bay has 5 tiers for files: 4 shelves plus the base level.

Is it safe to stand in the aisle?

Each upstand has a safety lock that stops the bays moving while someone is retrieving files, and an anti-topple safety bearing keeps a bay upright if it reaches the end of the track hard.

What is it made of?

Cold rolled carbon steel to JIS G3141 SPCC-SD, put through a 7 stage pre-treatment and powder coated at 50 to 80 micron, baked above 200 °C. The track is solid steel, 32 mm wide by 19 mm high.

Do you supply and install mobile compactors in Malaysia?

Yes. Igreen Office Furniture Sdn. Bhd. supplies and installs the mechanical mobile compactor in Malaysia. Send the room size on WhatsApp and we will propose a layout and quotation.

Arrange a quotation for the Mechanical Mobile Compactor on WhatsApp

Processing...