Perancangan Perabot Tahun Kewangan Baharu: Senarai Semak Jabatan Kerajaan

News

20 Nov 2026

Perancangan Perabot Tahun Kewangan Baharu: Senarai Semak Jabatan Kerajaan

MOF And E-Perolehan Office Furniture Supplier

Perancangan perabot sebelum kitaran kewangan baharu bermula membantu jabatan mengenal pasti keperluan sebenar dan mengelakkan permohonan saat akhir. Mulakan dengan semakan keadaan aset, guna semula perabot yang masih sesuai, kemudian rancang spesifikasi dan kaedah perolehan mengikut pekeliling serta proses jabatan yang terkini.

Audit Keadaan, Semak Inventori, Guna Semula, Senarai Keperluan

Apakah yang patut disemak sebelum menyediakan permohonan?

Audit keadaan dan inventori ialah langkah awal untuk membezakan perabot yang masih boleh digunakan daripada item yang perlu dibaiki atau diganti. Libatkan pengguna, unit aset dan pentadbiran supaya senarai permohonan mencerminkan keadaan ruang sebenar.

  • Senaraikan meja, kerusi, kabinet, rak fail dan item lain yang dimiliki jabatan.
  • Catat keadaan, lokasi dan sama ada item boleh dipindahkan atau dibaiki.
  • Semak pertambahan pengguna, perubahan ruang dan keperluan operasi.
  • Padankan permintaan baharu dengan kelayakan WP 2.1 semasa.
  • Kenal pasti item yang mungkin berkaitan dengan Kontrak Panel Berpusat.

Bagaimanakah jabatan boleh merancang mengikut peringkat?

Rancang keperluan, semakan peraturan, penyediaan dokumen dan pemasangan sebagai satu urutan kerja. Tempoh sebenar bergantung pada skop, kelulusan dan proses agensi; jadual ini ialah senarai semak, bukan jaminan masa.

Peringkat Tindakan Hasil yang perlu disimpan
Semakan aset Periksa keadaan dan lokasi perabot sedia ada Senarai aset untuk guna semula, baiki atau ganti
Keperluan ruang Semak jumlah pengguna dan fungsi setiap ruang Senarai keperluan mengikut ruang
Semakan pekeliling Rujuk WP 2.1, PK 2.1 dan PK 2.7 terkini jika berkaitan Catatan kelayakan dan kaedah yang disemak
Spesifikasi Sediakan ciri generik dan Jadual Pematuhan Dokumen spesifikasi yang disemak
Pelawaan dan penilaian Ikut proses agensi dan ePerolehan jika terpakai Rekod pelawaan, penilaian dan keputusan
Penghantaran dan aset Susun pemasangan, pemeriksaan dan pendaftaran Rekod penerimaan serta daftar aset dikemas kini

Bagaimanakah guna semula boleh didahulukan?

Guna semula bermula dengan memadankan perabot sedia ada kepada keperluan ruang yang baharu atau berubah. Perabot yang masih sesuai boleh dipindahkan, disusun semula atau dibaiki; penggantian boleh ditumpukan kepada item yang tidak lagi memenuhi keperluan.

Catatkan keputusan supaya rekod aset menerangkan lokasi baharu, tindakan pembaikan atau sebab penggantian. Ini juga membantu unit perolehan membezakan permintaan baharu daripada aset yang sudah tersedia.

Bagaimanakah jabatan patut merancang kaedah perolehan?

Semak jumlah nilai keseluruhan dan arahan terkini sebelum menentukan pembelian terus, sebut harga atau tender di bawah PK 2.1. Jika item berpotensi berada di bawah Kontrak Panel Berpusat, semak PK 2.7 dan pindaan semasa bersama unit perolehan.

Jangan masukkan had nilai yang diingati daripada bahan lama ke dalam pelan. Nyatakan dalam senarai semak bahawa had dan kaedah perlu disahkan semula pada masa permohonan dibuat.

Apakah senarai semak ringkas untuk unit pentadbiran?

Gunakan urutan berikut untuk membawa perancangan daripada semakan aset kepada penyerahan perabot.

  1. Semak inventori dan keadaan perabot.
  2. Utamakan penggunaan semula atau pembaikan yang sesuai.
  3. Senaraikan kekurangan mengikut bilik dan jumlah pengguna.
  4. Semak WP 2.1 serta kaedah perolehan semasa.
  5. Sediakan spesifikasi neutral dan jadual penilaian.
  6. Rancang akses penghantaran, pemasangan, pemeriksaan dan kemas kini aset.

Bagaimanakah iGreen Office Furniture boleh membantu?

iGreen Office Furniture ialah pembekal berdaftar dengan Kementerian Kewangan (MOF). Pasukan kami di Kuala Lumpur and Penang boleh berbincang tentang pilihan meja, kerusi dan storan, termasuk cara menyepadukan item baharu dengan perabot sedia ada.

Lihat meja pejabat, kerusi pejabat dan storan pejabat. Keputusan kelayakan, bajet dan kaedah perolehan perlu disahkan oleh jabatan. Hubungi iGreen Office Furniture untuk perbincangan perancangan.

Bagaimanakah perancangan boleh menyokong perolehan hijau?

Utamakan perabot tahan lama, boleh dibaiki dan boleh digunakan semula. Semak keadaan aset sebelum membeli dan pertimbangkan pemindahan atau pembaikan apabila ia sesuai dengan fungsi ruang.

Apakah soalan lazim tentang perancangan perabot jabatan?

Bilakah jabatan patut mula merancang?

Mulakan sebelum senarai keperluan dan dokumen perolehan perlu dimuktamadkan supaya unit berkaitan mempunyai masa untuk menyemak aset, ruang dan spesifikasi.

Perlukah semua perabot lama diganti?

Tidak. Periksa keadaan dan kesesuaian dahulu; item yang masih boleh digunakan mungkin boleh dipindahkan atau dibaiki.

Apakah pekeliling yang perlu disemak?

Semak WP 2.1 bagi peraturan perabot dan kelengkapan, PK 2.1 bagi kaedah perolehan serta PK 2.7 jika Kontrak Panel Berpusat berkaitan. Sahkan versi terkini dengan unit perolehan.

Bagaimanakah jabatan patut merancang tempoh pembelian?

Gunakan jadual kerja dalaman dan sahkan kelulusan, proses pelawaan serta jangkaan pembekal. Tempoh bergantung pada skop dan keadaan semasa.

How can an agency plan furniture for the next financial cycle?

Planning furniture before the next financial cycle helps an agency identify genuine needs and avoid last-minute requests. Start with an asset condition review, reuse suitable furniture, then plan specifications and procurement methods under current circulars and agency procedures.

Rancang Awal, Semak Pekeliling, Jadual Perolehan, Daftar Aset

What should be checked before preparing a request?

An asset and condition review helps distinguish furniture that can remain in use from items that may need repair or replacement. Involve users, asset officers and administration staff so the request reflects the actual spaces.

  • List desks, chairs, cabinets, file racks and other agency items.
  • Record condition, location and whether each item can be moved or repaired.
  • Review user numbers, room changes and operational needs.
  • Match new requests against current WP 2.1 eligibility.
  • Identify items that may relate to a Centralised Panel Contract.

How can an agency plan the stages?

Plan requirements, circular checks, document preparation and installation as a connected workflow. Actual timing depends on scope, approvals and agency processes; this table is a checklist, not a time guarantee.

Stage Action Record to keep
Asset review Inspect existing furniture condition and location Items to reuse, repair or replace
Space needs Check user numbers and room functions Room-by-room needs list
Circular review Check current WP 2.1, PK 2.1 and PK 2.7 where relevant Eligibility and method review notes
Specifications Prepare generic features and compliance schedule Reviewed specification document
Invitation and evaluation Follow agency process and ePerolehan where applicable Invitation, evaluation and decision records
Delivery and assets Arrange installation, inspection and registration Acceptance record and updated asset register

How can reuse come first?

Reuse starts by matching existing furniture to new or changed space needs. Suitable items may be moved, rearranged or repaired; replacement can focus on furniture that no longer meets the requirement.

Record each decision so the asset register reflects the new location, repair action or replacement reason. This also helps procurement distinguish a new request from assets already available.

How should an agency plan the procurement method?

Check total value and current instructions before choosing direct purchase, quotation or tender under PK 2.1. If an item may be covered by a Centralised Panel Contract, review PK 2.7 and its current amendments with the procurement unit.

Do not put a value limit remembered from an older document into the plan. Add a note to reconfirm the current limit and method when the request is prepared.

What is a practical checklist for an administration unit?

Use this sequence to carry furniture planning from asset review through handover.

  1. Review the inventory and furniture condition.
  2. Prioritise suitable reuse or repair.
  3. List gaps by room and user count.
  4. Check WP 2.1 and current procurement methods.
  5. Prepare neutral specifications and evaluation schedule.
  6. Plan delivery access, installation, inspection and asset updates.

How can iGreen Office Furniture help?

iGreen Office Furniture is a supplier registered with the Ministry of Finance (MOF). Our Kuala Lumpur and Penang team can discuss desk, chair and storage options, including how new items may work alongside existing furniture.

Browse office desks, office chairs and office storage. The agency should confirm eligibility, budget and procurement method with its own units. Contact iGreen Office Furniture to discuss the plan.

How can planning support greener procurement?

Prioritise durable, repairable and reusable furniture. Check the asset condition before buying and consider relocation or repair when it suits the space’s function.

What are common questions about agency furniture planning?

When should an agency start planning?

Start before the needs list and procurement documents must be finalised, so relevant units have time to review assets, spaces and specifications.

Does all old furniture need to be replaced?

No. Check condition and suitability first; items that remain usable may be moved or repaired.

Which circulars should be checked?

Check WP 2.1 for furniture and equipment rules, PK 2.1 for procurement methods and PK 2.7 where a Centralised Panel Contract may apply. Confirm the current versions with procurement staff.

How should an agency plan procurement timing?

Use the internal work schedule and confirm approvals, invitation steps and supplier expectations. Timing depends on scope and current conditions.

Contoh Reka Bentuk Rujukan (atau Setara) / Reference Designs (or Equivalent)

Contoh di bawah boleh dijadikan rujukan semasa menyediakan Jadual Pematuhan Spesifikasi Teknikal. Nyatakan "atau setara" dalam spesifikasi untuk mematuhi prinsip perolehan yang adil, dan kongsi gambar serta pautan model dengan kontraktor atau pembekal yang membida.

The examples below can be used as a reference when preparing the technical specification compliance schedule. Add "or equivalent" to keep the specification fair, and share the model picture and link with the contractor or bidding supplier.

FlexiSpot EF1 – Meja Boleh Laras Ketinggian / Height-Adjustable Desk – iGreen Office Furniture

iGreen Office Furniture · igreen.my

FlexiSpot EF1 – Meja Boleh Laras Ketinggian / Height-Adjustable Desk
Sesuai: ruang kerja fleksibel · Suits: flexible work areas

Spesifikasi rujukan (atau setara):

  • Ketinggian boleh laras 710–1210mm
  • Teknologi anti-perlanggaran dengan 3 tahap kepekaan
  • Binaan teguh dan stabil

Reference specification (or equivalent):

  • Height adjustable 710–1210mm
  • Anti-collision with 3 sensitivity levels
  • Robust, stable construction
Pedestal Bergerak 3 Laci / 3-Drawer Mobile Pedestal – iGreen Office Furniture

iGreen Office Furniture · igreen.my

Pedestal Bergerak 3 Laci / 3-Drawer Mobile Pedestal
Sesuai: setiap stesen kerja · Suits: every workstation

Spesifikasi rujukan (atau setara):

  • Permukaan MLC 25mm dengan tepi ABS 2mm
  • Badan MLC 16mm
  • Kunci pusat untuk semua laci (2 kunci)
  • Roda untuk dialihkan

Reference specification (or equivalent):

  • 25mm MLC top with 2mm ABS edging
  • 16mm MLC body
  • Central lock for all drawers (2 keys)
  • Castors for easy moving
Loker Besi / Steel Locker – iGreen Office Furniture

iGreen Office Furniture · igreen.my

Loker Besi / Steel Locker
Sesuai: bilik persalinan & kakitangan · Suits: staff and changing rooms

Spesifikasi rujukan (atau setara):

  • Kedalaman 15 atau 18 inci
  • 1 atau 3 unit lebar
  • Pintu berlubang (louver) untuk pengudaraan
  • Pilihan 1, 2, 4 atau 6 tingkat

Reference specification (or equivalent):

  • 15 or 18-inch depth
  • 1-wide or 3-wide units
  • Louvred doors for ventilation
  • 1, 2, 4 or 6 tier options
Rak Perpustakaan Besi / Steel Library Shelf – iGreen Office Furniture

iGreen Office Furniture · igreen.my

Rak Perpustakaan Besi / Steel Library Shelf
Sesuai: pusat sumber & perpustakaan · Suits: resource centres & libraries

Spesifikasi rujukan (atau setara):

  • Rangka keluli 16-gauge dikimpal penuh, salutan epoksi
  • Rak keluli 18-gauge
  • Rak boleh laras setiap 1 inci
  • Boleh ditambah atau dialih seksyen

Reference specification (or equivalent):

  • Fully welded 16-gauge steel frame, epoxy finish
  • 18-gauge steel shelves
  • Shelves adjustable in 1-inch steps
  • Sections can be added or relocated

Had Nilai Kaedah Perolehan (PK 2.1) / Procurement Method Thresholds (PK 2.1)

Kaedah / Method Had nilai bekalan & perkhidmatan / Value for supplies & services
Pembelian Terus / Direct Purchase Sehingga RM50,000 / Up to RM50,000
Sebut Harga / Quotation Melebihi RM50,000 hingga RM500,000 / Above RM50,000 up to RM500,000
Tender Terbuka / Open Tender Melebihi RM500,000 / Above RM500,000

Sumber: Pekeliling Perbendaharaan PK 2.1 Kaedah Perolehan Kerajaan (pindaan berkuat kuasa 1 Oktober 2024). Sentiasa semak versi terkini di Portal Pekeliling Perbendaharaan dan dengan unit perolehan jabatan. Barangan di bawah Kontrak Panel Berpusat (PK 2.7) perlu diperoleh melalui kontrak tersebut.

Source: Treasury Circular PK 2.1 Government Procurement Methods (amendment effective 1 October 2024). Always check the latest version on the Treasury Circular Portal and with your department's procurement unit. Items under a Central Panel Contract (PK 2.7) should be bought through that contract.

Untuk Jabatan di Seluruh Malaysia / For Departments Across Malaysia

Panduan ini terpakai kepada jabatan dan agensi persekutuan serta negeri di Putrajaya, Kuala Lumpur, Labuan, Selangor, Johor, Pulau Pinang, Perak, Kedah, Perlis, Kelantan, Terengganu, Pahang, Negeri Sembilan, Melaka, Sabah dan Sarawak. Kerajaan negeri juga mungkin mempunyai Pekeliling Kewangan Negeri sendiri; semak dengan Pejabat Kewangan Negeri atau unit perolehan agensi.

This guide applies to federal and state departments and agencies in Putrajaya, Kuala Lumpur, Labuan, Selangor, Johor, Penang, Perak, Kedah, Perlis, Kelantan, Terengganu, Pahang, Negeri Sembilan, Melaka, Sabah and Sarawak. State governments may also have their own state finance circulars; check with the State Finance Office or the agency procurement unit.

Untuk Kontraktor dan Pembekal yang Membida / For Contractors and Bidders

Kontraktor yang membida memerlukan rakan pembekal yang boleh menyediakan katalog, sampel, laporan ujian, penghantaran dan pemasangan mengikut Jadual Pematuhan jabatan. iGreen Office Furniture ialah pembekal berdaftar dengan Kementerian Kewangan (MOF) dan bekerjasama dengan kontraktor sebagai rakan bekalan. Hubungi kami melalui halaman hubungan dengan nombor rujukan sebut harga atau tender.

Bidding contractors need a supply partner that can provide catalogues, samples, test reports, delivery and installation that match the department's compliance schedule. iGreen Office Furniture is a Ministry of Finance (MOF) registered supplier and works with contractors as a supply partner. Contact us through our contact page with the quotation or tender reference number.

Keperluan Keselamatan & Ergonomik / Safety & Ergonomic Requirements

Di bawah Akta Keselamatan dan Kesihatan Pekerjaan 1994 (Akta 514), yang dipinda melalui Akta A1648 (berkuat kuasa 1 Jun 2024), majikan bertanggungjawab memastikan tempat kerja yang selamat. Rujukan berguna: Guidelines on Occupational Safety and Health for Seating at Work (edisi 2024) dan Guidelines on Occupational Safety and Health for Standing at Work (2024) oleh JKKP (DOSH), serta panduan JKKP tentang peralatan skrin paparan. Garis panduan JKKP juga merujuk standard Malaysia seperti MS ISO 1711-1 (kerusi pejabat boleh laras – dimensi), MS ISO 1791 (kerusi pelawat pejabat) dan MS 1839 Bahagian 1 (meja pejabat). Jika jabatan memerlukan bukti, minta katalog dan laporan ujian yang berkaitan daripada pembida.

Cara duduk yang betul: kaki rata di lantai atau di atas tempat letak kaki; paha lebih kurang mendatar; bahagian bawah belakang disokong; siku hampir setinggi meja; bahagian atas skrin hampir paras mata; ubah postur dari semasa ke semasa.

Under the Occupational Safety and Health Act 1994 (Act 514), as amended by Act A1648 (in force 1 June 2024), employers are responsible for a safe workplace. Useful references: DOSH Guidelines on Occupational Safety and Health for Seating at Work (2024 edition) and for Standing at Work (2024), plus DOSH guidance on display screen equipment. The DOSH guideline also refers to Malaysian Standards such as MS ISO 1711-1 (adjustable office chairs – dimensions), MS ISO 1791 (office visitor chairs) and MS 1839 Part 1 (office tables). Where the department needs proof, ask bidders for catalogues and relevant test reports.

How to sit properly: feet flat on the floor or a footrest; thighs roughly level; lower back supported; elbows near desk height; top of the screen near eye level; change posture regularly.

Senarai Semak Kerusi Mengikut Panduan JKKP / Chair Checklist Based on DOSH Guidance

Ciri kerusi / Chair feature Apa yang perlu disemak / What to check
Ketinggian tempat duduk / Seat height Boleh laras (gas lift) supaya paha lebih kurang mendatar dan kaki rata / Adjustable (gas lift) so thighs are roughly level and feet flat
Kedalaman tempat duduk / Seat depth Sesuai dengan pengguna, ada ruang di belakang lutut; lebih baik boleh laras / Fits the user with clearance behind the knees; adjustable is better
Sandaran & lumbar / Backrest & lumbar Menyokong lengkung bahagian bawah belakang; sokongan lumbar boleh laras / Supports the lower-back curve; adjustable lumbar support
Sudut sandaran / Backrest angle Boleh condong dengan ketegangan boleh laras / Reclines with adjustable tilt tension
Tempat letak tangan / Armrests Berlapik dan boleh laras ketinggian / Padded and height-adjustable
Tapak & roda / Base & castors Tapak 5 roda, berpusing, roda sesuai jenis lantai / 5-castor swivel base, castors suited to the floor
Kawalan / Controls Mudah dicapai semasa duduk dan tidak menyepit jari / Easy to reach while seated and do not trap fingers

Prepared by iGreen Office Furniture




Processing...